Skip to main content

Aircraft and Pilot Carding

 

Every aircraft and pilot used in support of a federal wildland fire mission must have a current Aircraft and Pilot Card or letter of authorization. The card must be held in the aircraft or with the pilot and give specific authorization to complete the requested mission. These missions could be all or any number of missions as follows:

  • Air Attack (Level I, Level II, Level III)
  • Reconnaissance
  • Fire Surveillance
  • Water Delivery (buckets)
  • Helitorch
  • Cargo
  • Longline
  • Plastic Sphere Dispenser (PSD) Operations

 

Every pilot who flies a properly-carded aircraft must possess a current Interagency Airplane or Helicopter Pilot Qualification Card that gives specific authorization to fly the type of mission requested and the specific type of aircraft being used for the mission. These missions could be all or any number of missions as follows:

  • Air Attack
  • Reconnaissance
  • Fire Surveillance
  • Low-level
  • Paracargo
  • Mountain/Remote Airstrips
  • Smokejumper
  • Longline

 

Before the aircraft and pilot can be used for a specific mission, the aircraft must be listed on a valid and current contract which includes the type of work being performed. A copy of the contract must be onboard the aircraft.

Each user of the aircraft and pilot has the authorization to physically inspect the Aircraft Data Card, the Interagency Airplane or Helicopter Pilot Qualification Card, and the contract. If any one of these three items is not available for inspection, the mission must be canceled or at least postponed until the authorization of the aircraft, pilot, or contract can be determined.

Pilots have very specific and closely monitored duty time and flight time limitations which users must understand and adhere to:

  • 14-hour duty day,
  • 8 hours flight time per day,
  • 2 days off in 14 calendar days, and
  • 36 hours cumulative flight time in any 6 consecutive days.

 

Category

Last Modified / Reviewed:


Have an idea or feedback?

Share it with the NWCG 6MFS Subcommittee
 


Follow NWCG on X and Facebook
 


 

NWCG Latest Announcements

NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212, and Next Generation Position Task Book for Basic Faller Are Now Available

Date: April 14, 2025
Questions?  Please contact:
Hazard Tree and Tree Felling Subcommittee

The updated NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212, and NWCG Position Task Book for Basic Faller (FAL3), PMS 311-19 are now available.

The NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212 includes position standards designed to be used in conjunction with the Next Generation Position Task Book (Next Gen PTB). The Next Gen PTB for Basic Faller (FAL3) includes an evaluation guide with suggested rating elements to consider when assessing trainees.

References:

NWCG Standards For Wildland Fire Chainsaw Operations, PMS 212

NWCG Position Task Book for Basic Faller (FAL3), PMS 311-119

NWCG Basic Faller (FAL3)

RMC Memo 25-01: Summary of Updates to Safety Officer Positions

Date: April 9, 2025
Questions?  Please contact:
RMC Member Eric Fransted

The Risk Management Committee (RMC) serves as the position steward for all Safety Officer incident positions and continues to improve position standards, training, and naming conventions. The implementation of Complex Incident Management (CIM) required changes to position titles. RMC collaborated with the NWCG Incident Position Standards Committee (IPSC) to propose and implement these updates. 

References:

RMC Memo 25-01: Summary of Updates to Safety Officer Positions 

NWCG Position Catalog

Updated, NWCG Guide to Wildland Fire Origin and Cause Determination, PMS 412

Date: April 8, 2025
Questions?  Please contact:
Wildland Fire Investigation Subcommittee

PMS 412 provides guidance for wildland fire investigations. This guide outlines recommended procedures, practices, techniques, and methods to promote a systematic approach. The last update to this publication was in 2016.

References:

NWCG Guide to Wildland Fire Origin and Cause Determination PMS 412

Updated NWCG Standards for Airtanker Base Operations, PMS 508

Date: March 31, 2025
Questions?  Please contact:
Airtanker Base Operations Unit

The updated NWCG Standards for Airtanker Base Operations (SABO), PMS 508 standardizes operations and procedures at interagency airtanker bases to ensure safe, efficient, and effective operations in support of interagency goals and objectives.

References:

NWCG Standards for Airtanker Base Operations, PMS 508