Skip to main content

Chainsaw Safety

 

Chainsaw safety is every saw operator’s job.

Always wear proper personal protective equipment (PPE) when handling or working around chainsaws.

  • Eye protection – approved goggles or safety glasses.
  • Hearing protection – earplugs or muffs.
  • Helmet.
  • Chainsaw Chaps – proper size and length.
  • Gloves – proper size.
  • Long sleeve shirt – no loose sleeves.
  • Leather boots – no loose boot laces.  

Take the time to inspect the chainsaw before operating the saw.

  • Check the chain and bar – sharpness of chain, bar seated correctly.
  • Check the bolts and screws all around the saw – no missing screws or bolts.
  • Check the casing of the saw – no cracked or missing plastic.
  • Felling axe and wedges in good condition.
  • Saw gas and bar oil in sufficient quantities to meet objectives.
  • Basic saw maintenance tools on site and specific to saw in use.
  • Review fuel geysering indicators/potential.  

Make sure you’re aware of your surroundings while operating the chainsaw.

  • Look for and anticipate people working in your area – the chainsaw operator is responsible for controlling the cutting area and communicating with others in the cutting area.
  • Look for any snags or overhead hazards in your area – maintain recommended spacing of falling teams or others working in the cutting area.
  • Establish consistent communications with spotters/swampers – always minimize personnel working directly at the stump or in the felling area.
  • Are there other risk factors that increase the complexity of the job – loose soils, rocky ground, steep terrain, weather factors or poor visibility, tree condition, others?  

Complete a personal Risk Assessment to determine if you are comfortable completing the task at hand – don’t let job performance pressure force you in over your skill level.

  • Proper training and certification level for personnel running saws and assisting with saw operations.
  • Describe your medical response plan and how it is implemented, including extricating a severe injury at the worksite.
  • If you are not comfortable falling the tree, walk away. Notify your supervisor and mitigate the safety issues or turn down the assignment.

 

Category

Last Modified / Reviewed:


Have an idea or feedback?

Share it with the NWCG 6MFS Subcommittee
 


Follow NWCG on X and Facebook
 


 

NWCG Latest Announcements

NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212, and Next Generation Position Task Book for Basic Faller Are Now Available

Date: April 14, 2025
Questions?  Please contact:
Hazard Tree and Tree Felling Subcommittee

The updated NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212, and NWCG Position Task Book for Basic Faller (FAL3), PMS 311-19 are now available.

The NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212 includes position standards designed to be used in conjunction with the Next Generation Position Task Book (Next Gen PTB). The Next Gen PTB for Basic Faller (FAL3) includes an evaluation guide with suggested rating elements to consider when assessing trainees.

References:

NWCG Standards For Wildland Fire Chainsaw Operations, PMS 212

NWCG Position Task Book for Basic Faller (FAL3), PMS 311-119

NWCG Basic Faller (FAL3)

RMC Memo 25-01: Summary of Updates to Safety Officer Positions

Date: April 9, 2025
Questions?  Please contact:
RMC Member Eric Fransted

The Risk Management Committee (RMC) serves as the position steward for all Safety Officer incident positions and continues to improve position standards, training, and naming conventions. The implementation of Complex Incident Management (CIM) required changes to position titles. RMC collaborated with the NWCG Incident Position Standards Committee (IPSC) to propose and implement these updates. 

References:

RMC Memo 25-01: Summary of Updates to Safety Officer Positions 

NWCG Position Catalog

Updated, NWCG Guide to Wildland Fire Origin and Cause Determination, PMS 412

Date: April 8, 2025
Questions?  Please contact:
Wildland Fire Investigation Subcommittee

PMS 412 provides guidance for wildland fire investigations. This guide outlines recommended procedures, practices, techniques, and methods to promote a systematic approach. The last update to this publication was in 2016.

References:

NWCG Guide to Wildland Fire Origin and Cause Determination PMS 412

Updated NWCG Standards for Airtanker Base Operations, PMS 508

Date: March 31, 2025
Questions?  Please contact:
Airtanker Base Operations Unit

The updated NWCG Standards for Airtanker Base Operations (SABO), PMS 508 standardizes operations and procedures at interagency airtanker bases to ensure safe, efficient, and effective operations in support of interagency goals and objectives.

References:

NWCG Standards for Airtanker Base Operations, PMS 508