Skip to main content

Active Shooter – How to Respond

 

Run, Hide, Fight – Active Shooter Protocols

Good practices for coping with an active shooter situation:

  1. Be aware of your surroundings.
  2. Take note of the two nearest exits in any facility you visit.
  3. If you are in an office, stay in the office and secure the door.
  4. If you are in a hallway, get into a room and secure the door.
  5. As a last resort, attempt to take the active shooter down. When the shooter is at close range and you cannot flee, your chance of survival is much greater if you try to incapacitate the individual.
  6. Behaviors to look for in an active shooter (review Department of Homeland Security [DHS] link below in references).

**Call 911 only when it is safe to do so**

How to respond when law enforcement arrives:

  1. Remain calm and follow officers’ instructions.
  2. Put down any items in your hands (i.e., bags, jackets).
  3. Immediately raise hands and spread fingers.
  4. Keep hands visible at all times.
  5. Avoid making quick movements toward officers such as holding onto them for safety.
  6. Avoid pointing, screaming, and/or yelling.
  7. Do not stop to ask officers for help or direction when evacuating, just proceed in the direction from which officers are entering the premises.

Training your staff for an active shooter situation:

  1. Create an Emergency Action Plan (EAP).
    1. Implement training exercises based off the EAP.
  2. Preparedness and Prevention.
    1. DHS Active Shooter Situation – Options to Consider video –  https://youtu.be/yz5P2wy4X4o.

Discussion Questions:

  1. What are some considerations to help you be prepared to react appropriately in an active shooter situation on the fireline? At the Incident Command Post (ICP)?
  2. Do you know the location of the closest Law Enforcement?
  3. What about at ICP or Helibase?
    1. Does your Incident Management Team or module have an EAP that addresses the potential active shooter scenario?
    2. If an active shooter situation occurs at ICP, do you have the Security Manager’s number, so they can immediately send the closest Law Enforcement Officer, or do you call Communications on the radio?

Last Modified / Reviewed:


Have an idea or feedback?

Share it with the NWCG 6MFS Subcommittee
 


Follow NWCG on X and Facebook
 


 

NWCG Latest Announcements

NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212, and Next Generation Position Task Book for Basic Faller Are Now Available

Date: April 14, 2025
Questions?  Please contact:
Hazard Tree and Tree Felling Subcommittee

The updated NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212, and NWCG Position Task Book for Basic Faller (FAL3), PMS 311-19 are now available.

The NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212 includes position standards designed to be used in conjunction with the Next Generation Position Task Book (Next Gen PTB). The Next Gen PTB for Basic Faller (FAL3) includes an evaluation guide with suggested rating elements to consider when assessing trainees.

References:

NWCG Standards For Wildland Fire Chainsaw Operations, PMS 212

NWCG Position Task Book for Basic Faller (FAL3), PMS 311-119

NWCG Basic Faller (FAL3)

RMC Memo 25-01: Summary of Updates to Safety Officer Positions

Date: April 9, 2025
Questions?  Please contact:
RMC Member Eric Fransted

The Risk Management Committee (RMC) serves as the position steward for all Safety Officer incident positions and continues to improve position standards, training, and naming conventions. The implementation of Complex Incident Management (CIM) required changes to position titles. RMC collaborated with the NWCG Incident Position Standards Committee (IPSC) to propose and implement these updates. 

References:

RMC Memo 25-01: Summary of Updates to Safety Officer Positions 

NWCG Position Catalog

Updated, NWCG Guide to Wildland Fire Origin and Cause Determination, PMS 412

Date: April 8, 2025
Questions?  Please contact:
Wildland Fire Investigation Subcommittee

PMS 412 provides guidance for wildland fire investigations. This guide outlines recommended procedures, practices, techniques, and methods to promote a systematic approach. The last update to this publication was in 2016.

References:

NWCG Guide to Wildland Fire Origin and Cause Determination PMS 412

Updated NWCG Standards for Airtanker Base Operations, PMS 508

Date: March 31, 2025
Questions?  Please contact:
Airtanker Base Operations Unit

The updated NWCG Standards for Airtanker Base Operations (SABO), PMS 508 standardizes operations and procedures at interagency airtanker bases to ensure safe, efficient, and effective operations in support of interagency goals and objectives.

References:

NWCG Standards for Airtanker Base Operations, PMS 508