Skip to main content

Noise Exposure Safety

 

Working in noisy environments presents daily safety challenges to wildland firefighters. Noise exposure research clearly indicates that accidents and injuries increase in noisy work environments. Additionally, did you know that hearing loss is permanent? The good news is it’s also preventable.

Those most at risk of excessive noise exposure include:

  • Sawyers/swampers
  • Heavy equipment operators
  • Helitack/helibase/airtanker base personnel 
  • Engine and pump operators
  • Masticator/chipper workers
  • Operators of weed whackers/leaf blowers/air compressors
  • Retardant mixing personnel

Noise exposure will cause:

  • Fatigue
  • Headaches
  • Distraction
  • Miscommunication
  • Inability to hear warnings
  • Increased errors

Mitigation Techniques

  • When possible, stay as far away from the noise source as possible.
  • Limit the amount of time you are exposed to the noise.
  • Give your ears a break from the noise when possible; the quiet break will help conserve your hearing.
  • Always wear hearing protection making certain that:
    • Your hearing protection has a Noise Reduction Ratio (NRR) of at least 20 dBA (level of protection in decibels) which is listed on the package.
    • You know how to insert/use/maintain them.
    • Your ear plugs are clean.​
      • NOTE: dirty ear plugs are better than no ear plugs but grab some extras because they work better when changed often.
    • When not in use, keep your ear plugs somewhere safe and clear (preferably not your Nomex buttonhole).
6. Be alert. Keep calm. Think clearly. Act decisively. On the left side of a split screen, four firefighters stand near a wildland fire, listening to a radio in the hands of one.  On the right side of the screen, a supervisory firefighter talks into a handheld radio.

6. Be alert. Keep calm. Think clearly. Act decisively.

Remaining alert, keeping calm, thinking clearly, and acting decisively are important components of decision-making on wildland fire incidents. This Standard Firefighting Order illustrates a supervisor providing direction and establishing leader's intent to help a crew working on a growing fire.

Read about all 10 Standard Firefighting Orders.

Discussion Questions

  • How can exposure to excessive noise reduce the firefighter’s ability to maintain good situational awareness and fulfill the 10 Standard Fire Orders?
    • Be alert. Keep calm. Think clearly. Act decisively.
    • Give clear instructions and be sure they are understood.
    • Fight fire aggressively, having provided for safety first.
  • Are you wearing hearing protection when you work in all noisy environments?
  • What are some solutions for a flight helmet that lets noise in because the ear cup doesn’t fit correctly?
  • When working with chainsaws, mowers, and weed whackers, etc., at home, how do you protect your hearing?

Action:

  1. Look at your ear plugs. If they’re dirty, get a new pair and a spare.
  2. Find out if your unit has a hearing conservation program and join it.
  3. Consider turning down your music just a little bit, especially when you listen with earbuds.

 

Last Modified / Reviewed:

Have an idea or feedback?

Share it with the NWCG 6MFS Subcommittee.


Follow NWCG on Twitter and Facebook

NWCG Latest Announcements

NWCG Equipment Technology Committee Releases Safety Warning: 25-001 Non-specification fire shelters

Date: January 15, 2025
Contact: Equipment Technology Committee

The Equipment Technology Committee (ETC) has released Safety Warning: 25-001 Non-specification fire shelters. Non-specification fire shelters claiming to meet Forest Service (FS) fire shelter specification 5100-606 were first found in February of 2023. As of September 2024, non-specification shelters are again being advertised and sold on the open market.

This Safety Warning outlines details and recommended procedures to purchase FS specification shelters made with materials and components that meet performance criteria and toxicity testing requirements outlined in FS Specification 5100-606. 

For additional information on identifying non-specification shelters, please view ETC Safety Warning 23-01.

References:

ETC Safety Warning 25-001: Non-specification fire shelters

NWCG Equipment Technology Committee

ETC Safety Warning 23-01

Paul Gleason Lead by Example Awards

Date: January 14, 2025
Contact: Leadership Committee

The NWCG Leadership Committee has awarded the 2023 Paul Gleason “Lead By Example” awards to individuals in the categories of Initiative and Innovation, Mentoring and Teamwork, and Motivation and Vision, as well as a Lifetime Achievement Award.

Congratulations to the awardees:

  • Sam Bowen, Superintendent of the Mark Twain Veteran Crew with the U.S. Forest Service.
  • Greg Titus, Zone Fire Management Officer for the St. Marks National Wildlife Refuge with U.S. Fish and Wildlife Service.
  • Renae Crippen, Manager of the Blue Mountain Interagency Dispatch Center with the U.S. Forest Service.
  • Eric Carlson, Instructor with OMNA International.

References:

Paul Gleason Lead by Example Award

Wildland Fire Leadership Development Program

Interview with Paul Gleason

Updated NWCG Standards for Water Scooping Operations, PMS 518

Date: December 19, 2024
Contact: Water Scooper Operations Unit

The NWCG Standards for Water Scooping Operations, PMS 518 establishes the standards for dispatching, utilizing, and coordinating water scooping aircraft on interagency wildland fires. These standards should be used in conjunction with the NWCG Standards for Aerial Supervision (SAS), PMS 505, and any local, state, or geographic/regional water scooping plans.

References:

NWCG Standards for Water Scooping Operations, PMS 518

Updated NWCG Standards for Aerial Supervision, PMS 505

Date: December 19, 2024
Contact: Interagency Aerial Supervision Subcommittee

The Interagency Aerial Supervision Subcommittee has updated the NWCG Standards for Aerial Supervision, PMS 505. PMS 505 establishes standards for aerial supervision operations for national interagency wildland fire operations. 

References:

NWCG Standards for Aerial Supervision, PMS 505