Skip to main content

Personal Protective Equipment – Helmet Inspection and Care

Wildland firefighting helmets are intended to reduce the severity of an impact. Helmets require frequent inspection to maintain performance standards. Inspection frequency will depend on its use and exposure. Inspect your helmet when it is first issued, after a significant event (involved in an accident, significant incident, or obvious damage), and periodically throughout the season. Helmets that do not meet the criteria in the Wildland Firefighter’s Helmet Serviceability Guide need to be removed from service.

The wildland firefighting helmet is certified to meet the National Fire Protection Association (NFPA) 1977 Standard for Protective Clothing and Equipment for Wildland Fire Fighting and Urban Interface Fire Fighting. The NFPA 1977 Standard ensures Personal Protective Equipment (PPE) meets minimum design, performance, labeling, testing, visibility, and certification requirements.

Image
Flow chart identifying the indicators of whether a wildland firefighter's helmet should be serviced or repaired.

 

 

 

 

Helmets certified to NFPA 1977 also meet ANSI Z89.1, Type 1, Class G. Type 1 helmets are intended to reduce the force of impact resulting from a blow to the top of the head. Class G helmets are intended to reduce the danger of contact with low-voltage electrical conductors.

Helmet Components: The wildland fire helmet is comprised of an outer shell and an adjustable inner suspension.

Date of Manufacture (DOM): Displayed as radial dials on the underside of the brim, one for the month and year of manufacture. Ten years or older should be removed from service, regardless of wear.

Outer Shell: Look for dents, cracks, gouges, discoloration, and deformities. Chemicals, bug spray, and some cleaning solutions can cause damage to the shell.

Compression Test: Pressure to the sides of the shell should result in a quick return to its original shape, demonstrating elasticity in the shell.

Suspension Inspection: Inspect suspension webbing for wear and tear. A damaged suspension can be replaced if the shell is still serviceable.

Suspension Keys: The suspension is attached using keys, these should be snapped into place and held snuggly in the helmet’s key slot. If a portion of the key is broken, cracked, or damaged, replace the suspension or remove the helmet from service.

Cleaning: Follow the manufacturer’s instructions for cleaning the shell and the suspension.

Storage: Store helmets in a cool, dark, and dry place. Do not store helmets near chemicals. Avoid direct sunlight.

Discussion Question:

  • Have you checked your hard hat lately?
     

Last Modified / Reviewed:

Have an idea or feedback?

Share it with the NWCG 6MFS Subcommittee.


Follow NWCG on Twitter and Facebook

NWCG Latest Announcements

NWCG Equipment Technology Committee Releases Safety Warning: 25-001 Non-specification fire shelters

Date: January 15, 2025
Contact: Equipment Technology Committee

The Equipment Technology Committee (ETC) has released Safety Warning: 25-001 Non-specification fire shelters. Non-specification fire shelters claiming to meet Forest Service (FS) fire shelter specification 5100-606 were first found in February of 2023. As of September 2024, non-specification shelters are again being advertised and sold on the open market.

This Safety Warning outlines details and recommended procedures to purchase FS specification shelters made with materials and components that meet performance criteria and toxicity testing requirements outlined in FS Specification 5100-606. 

For additional information on identifying non-specification shelters, please view ETC Safety Warning 23-01.

References:

ETC Safety Warning 25-001: Non-specification fire shelters

NWCG Equipment Technology Committee

ETC Safety Warning 23-01

Paul Gleason Lead by Example Awards

Date: January 14, 2025
Contact: Leadership Committee

The NWCG Leadership Committee has awarded the 2023 Paul Gleason “Lead By Example” awards to individuals in the categories of Initiative and Innovation, Mentoring and Teamwork, and Motivation and Vision, as well as a Lifetime Achievement Award.

Congratulations to the awardees:

  • Sam Bowen, Superintendent of the Mark Twain Veteran Crew with the U.S. Forest Service.
  • Greg Titus, Zone Fire Management Officer for the St. Marks National Wildlife Refuge with U.S. Fish and Wildlife Service.
  • Renae Crippen, Manager of the Blue Mountain Interagency Dispatch Center with the U.S. Forest Service.
  • Eric Carlson, Instructor with OMNA International.

References:

Paul Gleason Lead by Example Award

Wildland Fire Leadership Development Program

Interview with Paul Gleason

Updated NWCG Standards for Water Scooping Operations, PMS 518

Date: December 19, 2024
Contact: Water Scooper Operations Unit

The NWCG Standards for Water Scooping Operations, PMS 518 establishes the standards for dispatching, utilizing, and coordinating water scooping aircraft on interagency wildland fires. These standards should be used in conjunction with the NWCG Standards for Aerial Supervision (SAS), PMS 505, and any local, state, or geographic/regional water scooping plans.

References:

NWCG Standards for Water Scooping Operations, PMS 518

Updated NWCG Standards for Aerial Supervision, PMS 505

Date: December 19, 2024
Contact: Interagency Aerial Supervision Subcommittee

The Interagency Aerial Supervision Subcommittee has updated the NWCG Standards for Aerial Supervision, PMS 505. PMS 505 establishes standards for aerial supervision operations for national interagency wildland fire operations. 

References:

NWCG Standards for Aerial Supervision, PMS 505