Skip to main content

Smoke Exposure

 

Exposure to smoke during fire operations can be a significant safety concern. Research has shown that smoke exposure on prescribed fires, especially in the holding and ignition positions, often exceeds that on wildfires. There are many precautions that can be taken to limit personnel exposure to smoke.

Planning

Smoke exposure needs to be considered when planning suppression tactics and prescribed fires. Simple actions, such as the following, can mitigate smoke exposures.

  • Alter line locations to minimize smoke exposure.
  • Locate firelines in areas of lighter fuels or use roads or other barriers that will require less holding, patrol, and mop-up.
  • Use flanking attack as opposed to head attack (where appropriate) in heavy smoke situations.
  • Check fire behavior forecasts for smoke and inversion potential.
  • In heavy smoke, give up acres to gain control.

Implementation

Many techniques, including the following, can help reduce the exposure of personnel to heavy smoke.

  • Rotate people out of the heaviest smoke area; this may be the single most effective method.
  • Locate camps and Incident Command Posts in areas not prone to inversions.
  • Minimize snag falling, consistent with safety concerns, to avoid putting heavy fuels on the ground that will require mop-up.
  • Change firing patterns and pre-burning (black lining) during less severe conditions to greatly reduce exposure to smoke.
  • The use of retardant, foam, or sprinklers can also significantly reduce the workload and exposure time for holding crews.

 

Last Modified / Reviewed:


Have an idea or feedback?

Share it with the NWCG 6MFS Subcommittee
 


Follow NWCG on X and Facebook
 


 

NWCG Latest Announcements

NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212, and Next Generation Position Task Book for Basic Faller Are Now Available

Date: April 14, 2025
Questions?  Please contact:
Hazard Tree and Tree Felling Subcommittee

The updated NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212, and NWCG Position Task Book for Basic Faller (FAL3), PMS 311-19 are now available.

The NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212 includes position standards designed to be used in conjunction with the Next Generation Position Task Book (Next Gen PTB). The Next Gen PTB for Basic Faller (FAL3) includes an evaluation guide with suggested rating elements to consider when assessing trainees.

References:

NWCG Standards For Wildland Fire Chainsaw Operations, PMS 212

NWCG Position Task Book for Basic Faller (FAL3), PMS 311-119

NWCG Basic Faller (FAL3)

RMC Memo 25-01: Summary of Updates to Safety Officer Positions

Date: April 9, 2025
Questions?  Please contact:
RMC Member Eric Fransted

The Risk Management Committee (RMC) serves as the position steward for all Safety Officer incident positions and continues to improve position standards, training, and naming conventions. The implementation of Complex Incident Management (CIM) required changes to position titles. RMC collaborated with the NWCG Incident Position Standards Committee (IPSC) to propose and implement these updates. 

References:

RMC Memo 25-01: Summary of Updates to Safety Officer Positions 

NWCG Position Catalog

Updated, NWCG Guide to Wildland Fire Origin and Cause Determination, PMS 412

Date: April 8, 2025
Questions?  Please contact:
Wildland Fire Investigation Subcommittee

PMS 412 provides guidance for wildland fire investigations. This guide outlines recommended procedures, practices, techniques, and methods to promote a systematic approach. The last update to this publication was in 2016.

References:

NWCG Guide to Wildland Fire Origin and Cause Determination PMS 412

Updated NWCG Standards for Airtanker Base Operations, PMS 508

Date: March 31, 2025
Questions?  Please contact:
Airtanker Base Operations Unit

The updated NWCG Standards for Airtanker Base Operations (SABO), PMS 508 standardizes operations and procedures at interagency airtanker bases to ensure safe, efficient, and effective operations in support of interagency goals and objectives.

References:

NWCG Standards for Airtanker Base Operations, PMS 508