Skip to main content

Unexploded Ordnance Safety

 

Unexploded ordnance (UXO) is most likely to be encountered on military or former military sites. UXO poses risk of injury or death to anyone in the vicinity. 

Situation Awareness

  • Early identification of potential UXO is the first and most important step in reducing risk posed by UXO.
  • Many types of UXO may be encountered:
    • Small arms munitions
    • Guided missiles
    • Rockets
    • Projectiles
    • Mortars
    • Bombs
    • Grenades
    • Sub munitions
  • UXO may be found fully intact or in fragments. ALL UXO presents a potential hazard and should be treated as such.
  • Deteriorated UXO presents a particular hazard because it may contain chemical agents that could become exposed.

Hazard Control

  • If you see UXO, stop and do not move closer.
  • Isolate and clearly mark the area.
  • Deny entry to others.
  • Never transmit radio frequencies near UXO.
  • Never remove anything near UXO.
  • Never touch, move, or disturb UXO.
  • Keep a minimum of 1000 feet away from areas on fire that contain suspected UXO.
  • Report discovery of UXO to your immediate supervisor and/or dispatch.
  • U.S. Army Operations Center for incidents involving explosives and ammunition: (703) 697-0218.

 

 

Last Modified / Reviewed:


Have an idea or feedback?

Share it with the NWCG 6MFS Subcommittee
 


Follow NWCG on X and Facebook
 


 

NWCG Latest Announcements

NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212, and Next Generation Position Task Book for Basic Faller Are Now Available

Date: April 14, 2025
Questions?  Please contact:
Hazard Tree and Tree Felling Subcommittee

The updated NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212, and NWCG Position Task Book for Basic Faller (FAL3), PMS 311-19 are now available.

The NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212 includes position standards designed to be used in conjunction with the Next Generation Position Task Book (Next Gen PTB). The Next Gen PTB for Basic Faller (FAL3) includes an evaluation guide with suggested rating elements to consider when assessing trainees.

References:

NWCG Standards For Wildland Fire Chainsaw Operations, PMS 212

NWCG Position Task Book for Basic Faller (FAL3), PMS 311-119

NWCG Basic Faller (FAL3)

RMC Memo 25-01: Summary of Updates to Safety Officer Positions

Date: April 9, 2025
Questions?  Please contact:
RMC Member Eric Fransted

The Risk Management Committee (RMC) serves as the position steward for all Safety Officer incident positions and continues to improve position standards, training, and naming conventions. The implementation of Complex Incident Management (CIM) required changes to position titles. RMC collaborated with the NWCG Incident Position Standards Committee (IPSC) to propose and implement these updates. 

References:

RMC Memo 25-01: Summary of Updates to Safety Officer Positions 

NWCG Position Catalog

Updated, NWCG Guide to Wildland Fire Origin and Cause Determination, PMS 412

Date: April 8, 2025
Questions?  Please contact:
Wildland Fire Investigation Subcommittee

PMS 412 provides guidance for wildland fire investigations. This guide outlines recommended procedures, practices, techniques, and methods to promote a systematic approach. The last update to this publication was in 2016.

References:

NWCG Guide to Wildland Fire Origin and Cause Determination PMS 412

Updated NWCG Standards for Airtanker Base Operations, PMS 508

Date: March 31, 2025
Questions?  Please contact:
Airtanker Base Operations Unit

The updated NWCG Standards for Airtanker Base Operations (SABO), PMS 508 standardizes operations and procedures at interagency airtanker bases to ensure safe, efficient, and effective operations in support of interagency goals and objectives.

References:

NWCG Standards for Airtanker Base Operations, PMS 508