Skip to main content

Lookouts (LCES)

 

Lookouts provide time-sensitive information to firefighters. This Standard Firefighting Order demonstrates firefighters installing a pump and hose lay with a designated lookout to keep watch for and communicate possible hazards.

5. Post lookouts when there is possible danger. A firefighter works by a water pump in a creek.  Two firefighters spray water onto flames.  And another firefighter talks into a radio while observing all firefighters.

5. Post lookouts when there is possible danger.
 

Read about all 10 Standard Firefighting Orders.

Lookouts are often best situated to notice the cumulative changes of fire behavior.

Standard Firefighting Order #5 is: Post lookouts when there is possible danger.

  • Discuss why lookouts should be posted at all times.

What are you looking for when you are selecting a lookout location?

  • Choose a good vantage point, preferably with a good overview of the entire area where firefighters are located, including escape routes and safety zones.
  • Never rely exclusively on aircraft as your lookout.

What are the desired qualities, capabilities, knowledge, and responsibilities of a lookout?

  • Experienced firefighter.
  • Solid knowledge of fire behavior and the ability to recognize and monitor other environmental hazards.
  • Knowledge of crew locations, escape and safety locations, and trigger points.
  • Good communicator.
  • Knowledge of weather patterns, and signs of incoming weather changes.
  • Advises the crew of fire behavior changes, and tracks weather trends and relays the information.
  • Monitors and accounts for all individuals within the assigned area at all times, and notifies others if breaks are needed.

What is the necessary equipment for a lookout?

  • Personal protective equipment (PPE), radio with extra batteries, compass, binoculars, belt weather kit, an Incident Action Plan (IAP), map, food, water, and watch.

 

Last Modified / Reviewed:


Have an idea or feedback?

Share it with the NWCG 6MFS Subcommittee
 


Follow NWCG on X and Facebook
 


 

NWCG Latest Announcements

NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212, and Next Generation Position Task Book for Basic Faller Are Now Available

Date: April 14, 2025
Questions?  Please contact:
Hazard Tree and Tree Felling Subcommittee

The updated NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212, and NWCG Position Task Book for Basic Faller (FAL3), PMS 311-19 are now available.

The NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212 includes position standards designed to be used in conjunction with the Next Generation Position Task Book (Next Gen PTB). The Next Gen PTB for Basic Faller (FAL3) includes an evaluation guide with suggested rating elements to consider when assessing trainees.

References:

NWCG Standards For Wildland Fire Chainsaw Operations, PMS 212

NWCG Position Task Book for Basic Faller (FAL3), PMS 311-119

NWCG Basic Faller (FAL3)

RMC Memo 25-01: Summary of Updates to Safety Officer Positions

Date: April 9, 2025
Questions?  Please contact:
RMC Member Eric Fransted

The Risk Management Committee (RMC) serves as the position steward for all Safety Officer incident positions and continues to improve position standards, training, and naming conventions. The implementation of Complex Incident Management (CIM) required changes to position titles. RMC collaborated with the NWCG Incident Position Standards Committee (IPSC) to propose and implement these updates. 

References:

RMC Memo 25-01: Summary of Updates to Safety Officer Positions 

NWCG Position Catalog

Updated, NWCG Guide to Wildland Fire Origin and Cause Determination, PMS 412

Date: April 8, 2025
Questions?  Please contact:
Wildland Fire Investigation Subcommittee

PMS 412 provides guidance for wildland fire investigations. This guide outlines recommended procedures, practices, techniques, and methods to promote a systematic approach. The last update to this publication was in 2016.

References:

NWCG Guide to Wildland Fire Origin and Cause Determination PMS 412

Updated NWCG Standards for Airtanker Base Operations, PMS 508

Date: March 31, 2025
Questions?  Please contact:
Airtanker Base Operations Unit

The updated NWCG Standards for Airtanker Base Operations (SABO), PMS 508 standardizes operations and procedures at interagency airtanker bases to ensure safe, efficient, and effective operations in support of interagency goals and objectives.

References:

NWCG Standards for Airtanker Base Operations, PMS 508