Skip to main content

On A Hillside Where Rolling Material Can Ignite Fuel Below

 

Fires can move more quickly uphill. This Watch Out shows rolling logs and debris that are on fire and can ignite fuels below the crew building fireline.

13. On a hillside where rolling material can ignite fuel below. Several firefighters use tools to dig fireline up a steep hill.  Above them, logs and trees are on fire.

13. On a hillside where rolling material can ignite fuel below.

Read about all 18 Watch Out Situations.
 

When firefighters find themselves in Watch Out Situation #13, on a hillside where rolling material can ignite fuel below, they must answer the following questions:

  • Can you locate/construct a line to prevent material from rolling below? What do you call line that catches rolling material?
    • Describe how you would construct this type of line and what factors you would have to consider (e.g., slope, fuels, etc.).
  • Will you get enough warning of rolling material to prevent being hit by it? Who needs to be watching for rolling material? What kinds of warning systems could you establish?
  • Can you see where any material that rolls below you goes and what it does? What can happen when material rolls out of the fire and below you, out of view? What needs to be done to mitigate this danger?
  • Is the area free of large amounts of flashy fuels? Is the area free of chimneys, gullies, and steep slopes?
  • Do you have two escape routes so you can go either way? Talk about where your most likely escape routes and safety zones will be when you are on a hillside where rolling material can ignite fuel below.
  • To reduce the risks:
    • Post lookouts.
    • Consider locating line in a defensible position.
    • Talk about fires in steep terrain where you had material roll out below you and how you dealt with it.

 

Last Modified / Reviewed:


Have an idea or feedback?

Share it with the NWCG 6MFS Subcommittee
 


Follow NWCG on X and Facebook
 


 

NWCG Latest Announcements

NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212, and Next Generation Position Task Book for Basic Faller Are Now Available

Date: April 14, 2025
Questions?  Please contact:
Hazard Tree and Tree Felling Subcommittee

The updated NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212, and NWCG Position Task Book for Basic Faller (FAL3), PMS 311-19 are now available.

The NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212 includes position standards designed to be used in conjunction with the Next Generation Position Task Book (Next Gen PTB). The Next Gen PTB for Basic Faller (FAL3) includes an evaluation guide with suggested rating elements to consider when assessing trainees.

References:

NWCG Standards For Wildland Fire Chainsaw Operations, PMS 212

NWCG Position Task Book for Basic Faller (FAL3), PMS 311-119

NWCG Basic Faller (FAL3)

RMC Memo 25-01: Summary of Updates to Safety Officer Positions

Date: April 9, 2025
Questions?  Please contact:
RMC Member Eric Fransted

The Risk Management Committee (RMC) serves as the position steward for all Safety Officer incident positions and continues to improve position standards, training, and naming conventions. The implementation of Complex Incident Management (CIM) required changes to position titles. RMC collaborated with the NWCG Incident Position Standards Committee (IPSC) to propose and implement these updates. 

References:

RMC Memo 25-01: Summary of Updates to Safety Officer Positions 

NWCG Position Catalog

Updated, NWCG Guide to Wildland Fire Origin and Cause Determination, PMS 412

Date: April 8, 2025
Questions?  Please contact:
Wildland Fire Investigation Subcommittee

PMS 412 provides guidance for wildland fire investigations. This guide outlines recommended procedures, practices, techniques, and methods to promote a systematic approach. The last update to this publication was in 2016.

References:

NWCG Guide to Wildland Fire Origin and Cause Determination PMS 412

Updated NWCG Standards for Airtanker Base Operations, PMS 508

Date: March 31, 2025
Questions?  Please contact:
Airtanker Base Operations Unit

The updated NWCG Standards for Airtanker Base Operations (SABO), PMS 508 standardizes operations and procedures at interagency airtanker bases to ensure safe, efficient, and effective operations in support of interagency goals and objectives.

References:

NWCG Standards for Airtanker Base Operations, PMS 508