Skip to main content

Unburned Fuel Between You and The Fire

 

Heavy equipment is often used to construct fireline to slow fire progression because it can build wider fireline at a faster rate. This Watch Out requires extra situational awareness because there is unburned fuel between the bulldozer and the main fire.

11. Unburned fuel between you and fire. A yellow bulldozer leaves a fireline of dirt behind it.  Thick brush is between the line and the fire.

11. Unburned fuel between you and fire.
 

Read about all 18 Watch Out Situations.

It is important for firefighters to recognize Watch Out Situation #11, unburned fuel between themselves and the fire. Often it is not possible or practical for direct attack on a fire. Before attempting indirect attack and any time the firefighter is in a position where there is unburned fuel between them and the fire, the following questions must be addressed immediately:

  • Can you see the fire or are you in contact with someone who can? Discuss situations you might find yourself in where you are out in the green and cannot see the fire. What can you do?
  • Is fire spread in a direction away from you? Do you consider the potential for fire spread? Are you safe if the wind switches?
  • Will your position be defensible when the fire reaches you? Talk about what must be understood when building indirect line or approaching a fire through the green.
  • Is your line anchored? Discuss how you anchor indirect line.
  • Are your escape routes and safety zones adequate? What is adequate?
  • Are weather indicators constantly changing?
  • To reduce the risks:
    • Post lookouts.
    • Consider a different location.

Review situations where you constructed indirect line or approached a fire through the green and how you provided for your safety.

 

Last Modified / Reviewed:


Have an idea or feedback?

Share it with the NWCG 6MFS Subcommittee
 


Follow NWCG on X and Facebook
 


 

NWCG Latest Announcements

NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212, and Next Generation Position Task Book for Basic Faller Are Now Available

Date: April 14, 2025
Questions?  Please contact:
Hazard Tree and Tree Felling Subcommittee

The updated NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212, and NWCG Position Task Book for Basic Faller (FAL3), PMS 311-19 are now available.

The NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212 includes position standards designed to be used in conjunction with the Next Generation Position Task Book (Next Gen PTB). The Next Gen PTB for Basic Faller (FAL3) includes an evaluation guide with suggested rating elements to consider when assessing trainees.

References:

NWCG Standards For Wildland Fire Chainsaw Operations, PMS 212

NWCG Position Task Book for Basic Faller (FAL3), PMS 311-119

NWCG Basic Faller (FAL3)

RMC Memo 25-01: Summary of Updates to Safety Officer Positions

Date: April 9, 2025
Questions?  Please contact:
RMC Member Eric Fransted

The Risk Management Committee (RMC) serves as the position steward for all Safety Officer incident positions and continues to improve position standards, training, and naming conventions. The implementation of Complex Incident Management (CIM) required changes to position titles. RMC collaborated with the NWCG Incident Position Standards Committee (IPSC) to propose and implement these updates. 

References:

RMC Memo 25-01: Summary of Updates to Safety Officer Positions 

NWCG Position Catalog

Updated, NWCG Guide to Wildland Fire Origin and Cause Determination, PMS 412

Date: April 8, 2025
Questions?  Please contact:
Wildland Fire Investigation Subcommittee

PMS 412 provides guidance for wildland fire investigations. This guide outlines recommended procedures, practices, techniques, and methods to promote a systematic approach. The last update to this publication was in 2016.

References:

NWCG Guide to Wildland Fire Origin and Cause Determination PMS 412

Updated NWCG Standards for Airtanker Base Operations, PMS 508

Date: March 31, 2025
Questions?  Please contact:
Airtanker Base Operations Unit

The updated NWCG Standards for Airtanker Base Operations (SABO), PMS 508 standardizes operations and procedures at interagency airtanker bases to ensure safe, efficient, and effective operations in support of interagency goals and objectives.

References:

NWCG Standards for Airtanker Base Operations, PMS 508