Skip to main content

6.6 Vectors

A vector has a magnitude (often representing distance or speed) and direction. When a clinometer (see Section 4.5) is used to estimate the slope percent and the slope length is measured with a metal tape, the result is a vector. The slope length represent the magnitude and the slope percent can be converted into a slope angle that represents direction. Vectors can provide information about the distance and direction of fire spread, or the speed and direction of fire spread or wind. 

Example 1 - Linda is standing at point A. John is standing at point B. John reads the clinometer and finds a slope percent of 25 percent. They measure the slope length and get 18 feet. Draw the vector from point A and then again from point B.

Step 1. Following the steps in Section 4.5, convert the 25 percent to an angle with a calculator using inverse tan (tan-1).

tan A = 0.25, angle A = 14°

Step 2. Draw the vectors. 

image of vectors drawn with length and angle

WIND VECTORS

Wind is the horizontal movement of air relative to the surface of Earth. Recall from Section 6.2 that the wind direction is named by the direction from which the wind is blowing. If the wind is northerly, then the wind is coming from the north. When the wind is blowing into your face, the wind would be named from the direction you are facing. For example, Mandy is facing south and the wind is blowing into her face. The wind is said to be a southerly wind.

 

NWCG Latest Announcements

NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212, and Next Generation Position Task Book for Basic Faller Are Now Available

Date: April 14, 2025
Questions?  Please contact:
Hazard Tree and Tree Felling Subcommittee

The updated NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212, and NWCG Position Task Book for Basic Faller (FAL3), PMS 311-19 are now available.

The NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212 includes position standards designed to be used in conjunction with the Next Generation Position Task Book (Next Gen PTB). The Next Gen PTB for Basic Faller (FAL3) includes an evaluation guide with suggested rating elements to consider when assessing trainees.

References:

NWCG Standards For Wildland Fire Chainsaw Operations, PMS 212

NWCG Position Task Book for Basic Faller (FAL3), PMS 311-119

NWCG Basic Faller (FAL3)

RMC Memo 25-01: Summary of Updates to Safety Officer Positions

Date: April 9, 2025
Questions?  Please contact:
RMC Member Eric Fransted

The Risk Management Committee (RMC) serves as the position steward for all Safety Officer incident positions and continues to improve position standards, training, and naming conventions. The implementation of Complex Incident Management (CIM) required changes to position titles. RMC collaborated with the NWCG Incident Position Standards Committee (IPSC) to propose and implement these updates. 

References:

RMC Memo 25-01: Summary of Updates to Safety Officer Positions 

NWCG Position Catalog

Updated, NWCG Guide to Wildland Fire Origin and Cause Determination, PMS 412

Date: April 8, 2025
Questions?  Please contact:
Wildland Fire Investigation Subcommittee

PMS 412 provides guidance for wildland fire investigations. This guide outlines recommended procedures, practices, techniques, and methods to promote a systematic approach. The last update to this publication was in 2016.

References:

NWCG Guide to Wildland Fire Origin and Cause Determination PMS 412

Updated NWCG Standards for Airtanker Base Operations, PMS 508

Date: March 31, 2025
Questions?  Please contact:
Airtanker Base Operations Unit

The updated NWCG Standards for Airtanker Base Operations (SABO), PMS 508 standardizes operations and procedures at interagency airtanker bases to ensure safe, efficient, and effective operations in support of interagency goals and objectives.

References:

NWCG Standards for Airtanker Base Operations, PMS 508