Skip to main content

CFFDRS System Overview

  1. Introduction
  2. Use of English Units
  3. Wind Observations
  4. Fire Intensity Measures

Introduction

The Canadian Forest Fire Danger Rating System, as shown in these flow charts, is a comprehensive system of tools designed to evaluate environmental factors that influence the ignition, spread, and behavior of wildland fire. Additional detail about the system and its subsystems can be learned from an introductory certificate online course and direct access to the YouTube videos that support it:

CFFDRS Components

The system had its origins from early efforts dating to the 1920s and the development of the Tracer Index, a forerunner of the Fine Fuel Moisture Code (FFMC).

Image
The Fire Weather Index System. This process flow chart outlines the system inputs, as well as the array of output codes and indices

Fire Weather Index (FWI) System Process Flow Chart

The FWI system was developed and introduced across Canada in 1970. Due to its simplicity in terms of data required and outputs produced, it is used both globally and within many regions around the world.

Image
The Fire Weather Index System. This process flow chart outlines the system inputs, as well as the array of output codes and indices.

 

Fire Behavior Prediction (FBP) System Process Flow Chart

The FBP system tools were released in interim form in 1984, with a more formal introduction in 1992, and revisions in 2008.

Image
The Fire Behavior Prediction System. This process flow chart outlines the system inputs, as well as the array of primary fire behavior and secondary fire growth characteristics.

Additional systems for fuel moisture (e.g. hourly FFMC and Grass Fuel Moisture) and ignition have followed.

There are several important distinctions for NFDRS and NFBPS users.

Return to Top

Use of English Units

All the CFFDRS tools and references produced by the Canadian and Provincial governments, as well as applications produced internationally, use the metric system for all measured values. For the most part, measures referenced here are in English units to facilitate utility and use in the United States.

Return to Top

Wind Observations

This table provides a quick reference to aid conversion between 10m, 20ft, unsheltered Eye Level (EL Op) observations, and Forecast/Airport winds. 

Image
Open Windspeed Chart: Use only 10m for effective windspeed

CFFDRS weather observations, provided to the system for both FWI and FBP calculations, generally conform to familiar fire weather standards. These standards can be reviewed in the weather guide table referenced above. However, wind observation standards conform to the international 10m height as opposed to the NFDRS 20-foot height standard.

Image
This depiction highlights the difference in height standard among fixed and handheld wind sensors used in fire management applications.

(Andrews, 2012)

CFFDRS models and tools do not expressly apply relationships between the standard 10m wind measurements and others that U.S. users may be familiar with. Both 20-foot and eye level winds are commonly referenced and reported from U.S. RAWS observing locations and from the fireline.

Further, wind speeds reported from Airport ASOS (Automated Surface Observing System) and provided in National Weather Service forecasts generally report higher wind speed, where surrounding terrain is flat with little variation in vegetation height or structural interference, and is highly correlated with forecast wind speed provided in the National Digital Forecast Database (Lawson and Armitage, 2008).

Image
Surrounding terrain and surface characteristics affect the windspeed measured by sensors. Compares the speeds measured at generally flat/smooth surfaces around airport sensors, more variable and rougher terrain found in forest RAWS settings, and the highly modified results obtained in urban settings.

(Lawson & Armitage, 2008)

Return to Top

Fire Intensity Measures

A major adaptation in U.S. tools and references, with uncertain validity, is the use of flame length for fire intensity outputs in the Fire Behavior Tables. FBP outputs (kW/m) were converted to BTU/ft/sec using standard conversions and then to flame length using the formula:

Flame Length = .45*"BTU/Ft/Sec"^.46

This table identifies the CFFBP Fire Intensity thresholds in kW/m and the corresponding values in English units (BTU/ft/sec) and flame length in feet. These thresholds are consistent with commonly held flame length thresholds for fire safety interpretations in the U.S. system.

Image
The Fire Intensity Class Conversion Table shows the relationship among English and metric representations of fireline intensity at key threshold levels.

Return to Top

Print PDF

NWCG Latest Announcements

NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212, and Next Generation Position Task Book for Basic Faller Are Now Available

Date: April 14, 2025
Questions?  Please contact:
Hazard Tree and Tree Felling Subcommittee

The updated NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212, and NWCG Position Task Book for Basic Faller (FAL3), PMS 311-19 are now available.

The NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212 includes position standards designed to be used in conjunction with the Next Generation Position Task Book (Next Gen PTB). The Next Gen PTB for Basic Faller (FAL3) includes an evaluation guide with suggested rating elements to consider when assessing trainees.

References:

NWCG Standards For Wildland Fire Chainsaw Operations, PMS 212

NWCG Position Task Book for Basic Faller (FAL3), PMS 311-119

NWCG Basic Faller (FAL3)

RMC Memo 25-01: Summary of Updates to Safety Officer Positions

Date: April 9, 2025
Questions?  Please contact:
RMC Member Eric Fransted

The Risk Management Committee (RMC) serves as the position steward for all Safety Officer incident positions and continues to improve position standards, training, and naming conventions. The implementation of Complex Incident Management (CIM) required changes to position titles. RMC collaborated with the NWCG Incident Position Standards Committee (IPSC) to propose and implement these updates. 

References:

RMC Memo 25-01: Summary of Updates to Safety Officer Positions 

NWCG Position Catalog

Updated, NWCG Guide to Wildland Fire Origin and Cause Determination, PMS 412

Date: April 8, 2025
Questions?  Please contact:
Wildland Fire Investigation Subcommittee

PMS 412 provides guidance for wildland fire investigations. This guide outlines recommended procedures, practices, techniques, and methods to promote a systematic approach. The last update to this publication was in 2016.

References:

NWCG Guide to Wildland Fire Origin and Cause Determination PMS 412

Updated NWCG Standards for Airtanker Base Operations, PMS 508

Date: March 31, 2025
Questions?  Please contact:
Airtanker Base Operations Unit

The updated NWCG Standards for Airtanker Base Operations (SABO), PMS 508 standardizes operations and procedures at interagency airtanker bases to ensure safe, efficient, and effective operations in support of interagency goals and objectives.

References:

NWCG Standards for Airtanker Base Operations, PMS 508