Skip to main content

PMS 448

Tent – 2 Person

NFES #
000077
Category
Camp
Updated
Storage and Shelf Life Checks
None

2-person tent

Initial Inspection/Disposal Criteria

  1. Inspect immediately upon return for moisture, mold, or mildew.
  2. Inspect tent body and fly for any tears, holes, burns, zippers that do not provide adequate closure or unraveled seams that are not economically repairable.  Tears or holes smaller than 1 inch or 3 holes each less the ½ inch are repairable.
  3. Inspect for any missing components including any missing stretch cords or plastic hooks missing on rain fly, poles, or stakes.
  4. Inspect poles and stakes for cracks or broken poles, cracked or broken hinge joints, and bent or broken stake poles.
  5. Return to stock if tent is dry, clean, and in unused condition.
  6. Refurbish if item is free of mildew and mold, easily cleaned and any damages are economically feasible to repair.
  7. Dispose of tent if mold or mildew is present, if it fails initial inspection or if repairs are not economically feasible.

​Refurbishing Procedures

A. Cleaning

  1. Set up tent, sweep and remove dirt and debris.
  2. Wash with water and mild soap, rinse, and air dry.
  3. Remove dirt from tent stakes with a wire brush or water and mild soap.
  4. Use non staining non bleach products if sanitizing the inside of the tent.
  5. Allow tent, tent bag, and fly to air dry. 

B. Repair

  1. Replace broken poles and nonfunctioning hardware.
  2. Straighten bent stakes and remove burrs as necessary.
  3. Repair holes, tears, and seams following manufacturer’s recommendations. Use Tear Aid ® Type A patches to repair small holes.

C. Testing for Performance

  • Set up tent with the fly; test hinge joints for smooth operation.  Open and close all zippers ensuring adequate closure. Ensure correct fly and fly pole are with the tent.

D. Repackaging

  1. Collapse the tent and roll up so it fits in the bag. Add the fly and fly pole as well as the tent stakes (6 each). Photo below shows the parts needed. Seal the bag zipper with a small zip tie and place the complete bag into the box.
  2. 1 each in NFES #008073 carton (30” x 6” x 6”).
  3. 6 each in NFES #008081 carton (14.5” x 19.5” x 30”).

2-person tent bag and parts displayed on ground.

 

NWCG Latest Announcements

NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212, and Next Generation Position Task Book for Basic Faller Are Now Available

Date: April 14, 2025
Questions?  Please contact:
Hazard Tree and Tree Felling Subcommittee

The updated NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212, and NWCG Position Task Book for Basic Faller (FAL3), PMS 311-19 are now available.

The NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212 includes position standards designed to be used in conjunction with the Next Generation Position Task Book (Next Gen PTB). The Next Gen PTB for Basic Faller (FAL3) includes an evaluation guide with suggested rating elements to consider when assessing trainees.

References:

NWCG Standards For Wildland Fire Chainsaw Operations, PMS 212

NWCG Position Task Book for Basic Faller (FAL3), PMS 311-119

NWCG Basic Faller (FAL3)

RMC Memo 25-01: Summary of Updates to Safety Officer Positions

Date: April 9, 2025
Questions?  Please contact:
RMC Member Eric Fransted

The Risk Management Committee (RMC) serves as the position steward for all Safety Officer incident positions and continues to improve position standards, training, and naming conventions. The implementation of Complex Incident Management (CIM) required changes to position titles. RMC collaborated with the NWCG Incident Position Standards Committee (IPSC) to propose and implement these updates. 

References:

RMC Memo 25-01: Summary of Updates to Safety Officer Positions 

NWCG Position Catalog

Updated, NWCG Guide to Wildland Fire Origin and Cause Determination, PMS 412

Date: April 8, 2025
Questions?  Please contact:
Wildland Fire Investigation Subcommittee

PMS 412 provides guidance for wildland fire investigations. This guide outlines recommended procedures, practices, techniques, and methods to promote a systematic approach. The last update to this publication was in 2016.

References:

NWCG Guide to Wildland Fire Origin and Cause Determination PMS 412

Updated NWCG Standards for Airtanker Base Operations, PMS 508

Date: March 31, 2025
Questions?  Please contact:
Airtanker Base Operations Unit

The updated NWCG Standards for Airtanker Base Operations (SABO), PMS 508 standardizes operations and procedures at interagency airtanker bases to ensure safe, efficient, and effective operations in support of interagency goals and objectives.

References:

NWCG Standards for Airtanker Base Operations, PMS 508