Skip to main content

PMS 448

PMS 448

Introduction

COVID-19 Refurb Guidelines

References

All Content

Aviation

Camp

Clothing

Cordura

Fuel Handling

Kits

Medical

Miscellaneous

PPE

Small Engine Equipment

Tools

Water Handling

Deleted Items

Tank – Gasoline, 5 GL (18.9L), Pump Adapted

NFES #
000218
Category
Fuel Handling
Updated
Storage and Shelf Life Checks
None

Initial Inspection/Disposal Criteria

  1. Check for fuel in tank.  Evacuate tank if fuel is present.
  2. Inspect threads on connector for serviceability.  Inspect for missing or cracked and damaged gasket on cap.  Inspect all interior surfaces for rust that has pitted, is flaking or is lifting the interior surface.  Rust spots larger than a quarter or collectively multiple areas larger than a quarter will render the can unserviceable.  Some “flash rust” maybe present and is acceptable.  Using a mirror and flashlight, inspect the ceiling of the can for additional rust.
  3. Inspect for impacts or dents to corners and seams as separation and/or leaks may occur.
  4. Inspect and tighten quick release fuel valve. 
  5. Return to stock if clean and in unused condition.
  6. Refurbish item if tank is free of damage or rust.
  7. Dispose of item if tank damage is significant, leaks are detected or rust is found inside of tank.

Refurbishing Procedures

A. Cleaning

  1. Drain existing fuel and purge. Dispose of fuel according to hazardous material regulations and local policies.
  2. Use an air hose to dry the interior of the tank and remove debris inside the female opening of the quick disconnect coupling.
  3. Turn upside down with lids off to dry.
  4. Clean vent hole to ensure serviceability.
  5. Wipe down outside of container and repaint if necessary.

B. Repair

  1. Replace missing, cracked or stiff gaskets.
  2. Ensure fuel geyser warning label is present and legible. Reference cache memo 17-2 Fuel Geysering Awareness Sticker and Labels.
  3. Flammable liquid labels are not required for this fuel tank. Refer to NWCG Standards for Transporting Fuel, PMS 442.

C. Testing for performance

  1. Check all threads on connector for serviceability.

D. Repackaging

  1. Local cache option
  2. Recommended when shipping, pack in carton NFES #008052 (16”x14”x10”)

 

Print PDF

NWCG Latest Announcements

NWCG Equipment Technology Committee Releases Safety Warning: 25-001 Non-specification fire shelters

Date: January 15, 2025
Contact: Equipment Technology Committee

The Equipment Technology Committee (ETC) has released Safety Warning: 25-001 Non-specification fire shelters. Non-specification fire shelters claiming to meet Forest Service (FS) fire shelter specification 5100-606 were first found in February of 2023. As of September 2024, non-specification shelters are again being advertised and sold on the open market.

This Safety Warning outlines details and recommended procedures to purchase FS specification shelters made with materials and components that meet performance criteria and toxicity testing requirements outlined in FS Specification 5100-606. 

For additional information on identifying non-specification shelters, please view ETC Safety Warning 23-01.

References:

ETC Safety Warning 25-001: Non-specification fire shelters

NWCG Equipment Technology Committee

ETC Safety Warning 23-01

Paul Gleason Lead by Example Awards

Date: January 14, 2025
Contact: Leadership Committee

The NWCG Leadership Committee has awarded the 2023 Paul Gleason “Lead By Example” awards to individuals in the categories of Initiative and Innovation, Mentoring and Teamwork, and Motivation and Vision, as well as a Lifetime Achievement Award.

Congratulations to the awardees:

  • Sam Bowen, Superintendent of the Mark Twain Veteran Crew with the U.S. Forest Service.
  • Greg Titus, Zone Fire Management Officer for the St. Marks National Wildlife Refuge with U.S. Fish and Wildlife Service.
  • Renae Crippen, Manager of the Blue Mountain Interagency Dispatch Center with the U.S. Forest Service.
  • Eric Carlson, Instructor with OMNA International.

References:

Paul Gleason Lead by Example Award

Wildland Fire Leadership Development Program

Interview with Paul Gleason

Updated NWCG Standards for Water Scooping Operations, PMS 518

Date: December 19, 2024
Contact: Water Scooper Operations Unit

The NWCG Standards for Water Scooping Operations, PMS 518 establishes the standards for dispatching, utilizing, and coordinating water scooping aircraft on interagency wildland fires. These standards should be used in conjunction with the NWCG Standards for Aerial Supervision (SAS), PMS 505, and any local, state, or geographic/regional water scooping plans.

References:

NWCG Standards for Water Scooping Operations, PMS 518

Updated NWCG Standards for Aerial Supervision, PMS 505

Date: December 19, 2024
Contact: Interagency Aerial Supervision Subcommittee

The Interagency Aerial Supervision Subcommittee has updated the NWCG Standards for Aerial Supervision, PMS 505. PMS 505 establishes standards for aerial supervision operations for national interagency wildland fire operations. 

References:

NWCG Standards for Aerial Supervision, PMS 505