Skip to main content

PMS 448

PMS 448

PMS 448

Introduction

COVID-19 Refurb Guidelines

References

All Content

Aviation

Camp

Clothing

Cordura

Fuel Handling

Kits

Medical

Miscellaneous

PPE

Small Engine Equipment

Tools

Water Handling

Deleted Items

Shovel – with Plastic Sheath, Size #1

NFES #
000171
Category
Tools
Updated
Storage and Shelf Life Checks
None

Initial Inspection/Disposal Criteria

  1. Inspect for damage to cutting head, step plate, and handle.  Check for loose head and handle.  Ensure blade is 3 ¾” from center to the edge at the base of the shovel and the shovel has not been modified, bent or distorted.  Handle should be straight and free of cracks, chips, open grain, or residues (tar, sap, paints, etc.).
  2. Return to stock if item is clean and has not been used.
  3. Refurbish if item is unmodified and is repairable.
  4. Dispose of item if blade is less than 7 ½” wide, shows blue or burned edges, or has been welded, cut or otherwise modified and cannot be taken back to original shape and condition.

​Refurbishing Procedures

A. Cleaning

  • Wash and wipe dry.

B. Repair       

  1. Sand handle if it is chipped, dinged, rough or has tape residue. 
  2. Wipe handle with linseed oil after sanding.
  3. Apply rust inhibitor to tool head.  Local cache option for painting tool head.  Black paint only.
  4. Sharpen cutting edge, using tool sharpening gauge NFES #000510.
  5. Blade to be at least 7 ½ “wide.  USE NFES #000510.

C. Testing for Performance

  • None

D. Repackaging

  1. Install plastic sheath NFES #001853.
  2. 10 each in NFES #000337 carton (55” x 12 ½” x 11 ¾”).

 

Print PDF

NWCG Latest Announcements

NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212, and Next Generation Position Task Book for Basic Faller Are Now Available

Date: April 14, 2025
Questions?  Please contact:
Hazard Tree and Tree Felling Subcommittee

The updated NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212, and NWCG Position Task Book for Basic Faller (FAL3), PMS 311-19 are now available.

The NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212 includes position standards designed to be used in conjunction with the Next Generation Position Task Book (Next Gen PTB). The Next Gen PTB for Basic Faller (FAL3) includes an evaluation guide with suggested rating elements to consider when assessing trainees.

References:

NWCG Standards For Wildland Fire Chainsaw Operations, PMS 212

NWCG Position Task Book for Basic Faller (FAL3), PMS 311-119

NWCG Basic Faller (FAL3)

RMC Memo 25-01: Summary of Updates to Safety Officer Positions

Date: April 9, 2025
Questions?  Please contact:
RMC Member Eric Fransted

The Risk Management Committee (RMC) serves as the position steward for all Safety Officer incident positions and continues to improve position standards, training, and naming conventions. The implementation of Complex Incident Management (CIM) required changes to position titles. RMC collaborated with the NWCG Incident Position Standards Committee (IPSC) to propose and implement these updates. 

References:

RMC Memo 25-01: Summary of Updates to Safety Officer Positions 

NWCG Position Catalog

Updated, NWCG Guide to Wildland Fire Origin and Cause Determination, PMS 412

Date: April 8, 2025
Questions?  Please contact:
Wildland Fire Investigation Subcommittee

PMS 412 provides guidance for wildland fire investigations. This guide outlines recommended procedures, practices, techniques, and methods to promote a systematic approach. The last update to this publication was in 2016.

References:

NWCG Guide to Wildland Fire Origin and Cause Determination PMS 412

Updated NWCG Standards for Airtanker Base Operations, PMS 508

Date: March 31, 2025
Questions?  Please contact:
Airtanker Base Operations Unit

The updated NWCG Standards for Airtanker Base Operations (SABO), PMS 508 standardizes operations and procedures at interagency airtanker bases to ensure safe, efficient, and effective operations in support of interagency goals and objectives.

References:

NWCG Standards for Airtanker Base Operations, PMS 508