Skip to main content

Escape Routes 1

 

Fire managers make decisions throughout the day on how to suppress fires and best use resources while protecting life and property. This Standard Firefighting Order depicts a firefighter observing increased fire behavior during a time of day when temperatures are high and relative humidity is low.

3. Base all actions on current and expected behavior of the fire. A firefighter looks at his watch, which reads 2 PM, while a fire actively grows in steep terrain and heavy timber.

3. Base all actions on current and expected behavior of the fire.

Read about all 10 Standard Firefighting Orders.

 

Consider the following scenario:

It’s 1400, you have been working all morning. How far away are your safety zones? Safety zones are only good if you can reach them. How long will your escape route take? What is the condition of the crew? How long will it take your slowest member to get there? Are your expectations realistic?

Look at the times below. If your fire blows up right now, can you, and every member of your crew, make it to your safety zone?

Graphic showing the minutes it took from blowup to burnover on the following fires: Loop, Griffith Park - 5 minutes.; Dude - 8 minutes; South Canyon - 9 minutes;  Rainbow Springs, Spanish Ranch - 10 minutes; Hauser Creek - 11 minutes; Cart, Blackwater - 15 minutes; Pepper Run - 17 minutes; Cramer - 24 minutes; Rock Creek - 30 minutes; Toulumne - 39 minutes; Battlement Creek - 48 minutes; Thirty-mile Canyon - 50 minutes; Yarnell Hill - 52 minutes; Blue Ribbon - 60 minutes.

The “Take 5@2” safety messages are a cooperative project of 6 Minutes for Safety, the Wildland Fire Safety Training Annual Refresher (WFSTAR), NIFC External Affairs, the NWCG Leadership Committee, the NWCG Risk Management Committee, and the Wildland Fire Lessons Learned Center.

 

Also see: Escape Routes Part 2, and Escape Routes Part 3

 

 

Last Modified / Reviewed:


Have an idea or feedback?

Share it with the NWCG 6MFS Subcommittee
 


Follow NWCG on X and Facebook
 


 

NWCG Latest Announcements

NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212, and Next Generation Position Task Book for Basic Faller Are Now Available

Date: April 14, 2025
Questions?  Please contact:
Hazard Tree and Tree Felling Subcommittee

The updated NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212, and NWCG Position Task Book for Basic Faller (FAL3), PMS 311-19 are now available.

The NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212 includes position standards designed to be used in conjunction with the Next Generation Position Task Book (Next Gen PTB). The Next Gen PTB for Basic Faller (FAL3) includes an evaluation guide with suggested rating elements to consider when assessing trainees.

References:

NWCG Standards For Wildland Fire Chainsaw Operations, PMS 212

NWCG Position Task Book for Basic Faller (FAL3), PMS 311-119

NWCG Basic Faller (FAL3)

RMC Memo 25-01: Summary of Updates to Safety Officer Positions

Date: April 9, 2025
Questions?  Please contact:
RMC Member Eric Fransted

The Risk Management Committee (RMC) serves as the position steward for all Safety Officer incident positions and continues to improve position standards, training, and naming conventions. The implementation of Complex Incident Management (CIM) required changes to position titles. RMC collaborated with the NWCG Incident Position Standards Committee (IPSC) to propose and implement these updates. 

References:

RMC Memo 25-01: Summary of Updates to Safety Officer Positions 

NWCG Position Catalog

Updated, NWCG Guide to Wildland Fire Origin and Cause Determination, PMS 412

Date: April 8, 2025
Questions?  Please contact:
Wildland Fire Investigation Subcommittee

PMS 412 provides guidance for wildland fire investigations. This guide outlines recommended procedures, practices, techniques, and methods to promote a systematic approach. The last update to this publication was in 2016.

References:

NWCG Guide to Wildland Fire Origin and Cause Determination PMS 412

Updated NWCG Standards for Airtanker Base Operations, PMS 508

Date: March 31, 2025
Questions?  Please contact:
Airtanker Base Operations Unit

The updated NWCG Standards for Airtanker Base Operations (SABO), PMS 508 standardizes operations and procedures at interagency airtanker bases to ensure safe, efficient, and effective operations in support of interagency goals and objectives.

References:

NWCG Standards for Airtanker Base Operations, PMS 508