Skip to main content

6MFS

6MFS Committee

All 6MFS Topics

6MFS Calendar

Aviation

Airtankers

Felling Safety

Fire Communication

Firefighter Health & First Aid

Leadership

Misc Fireline Hazards

Operational Engagement

This Day in History

Vehicles - Roads

Weather - Fire Behavior

Week of Remembrance

Escape Routes 3

 

Continued from: Escape Routes Part 2

 

A primary objective of every operational fire plan is to keep firefighters out of entrapment situations. However, firefighters must always be prepared to escape quickly to a safety zone or deployment area. Consider the following while discussing escape from possible entrapment.

Have a plan that includes trigger points.

  • Trigger Point: An observable event that triggers a pre-determined action.
    Example: If the temperature reaches 98 °F and relative humidity (RH) goes into single digits, the crew will follow the established escape route to the safety zone.

Reassess escape routes throughout the operational period.

  • Does access to escape routes become more difficult as the day progresses?
  • Do you have more than one escape route?
  • Are all escape routes clearly marked?
  • Are all firefighters familiar with the escape routes?

During an escape, time will be short. Describe considerations in this situation such as:

  • Maintain all critical equipment such as personal protective equipment (PPE) and radio. Discard gear that will not aid in your escape.
  • Maintain contact with all other crewmembers.

Describe a good safety zone. How is that different from a deployment area?

You should always know the location of your escape routes leading to safety zones and deployment areas.

 

Also see: Escape Routes Part 1 (Take 5@2)

 

Category
Operational Engagement
References
"LCES and Other Thoughts" by Paul Gleason
10 Standard Firefighting Orders, PMS 110
18 Watch Out Situations, PMS 118
10 and 18 Poster, PMS 110-18

Last Modified / Reviewed:


Have an idea or feedback?

Share it with the NWCG 6MFS Subcommittee
 


Follow NWCG on X and Facebook
 


 

Print PDF

NWCG Latest Announcements

NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212, and Next Generation Position Task Book for Basic Faller Are Now Available

Date: April 14, 2025
Questions?  Please contact:
Hazard Tree and Tree Felling Subcommittee

The updated NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212, and NWCG Position Task Book for Basic Faller (FAL3), PMS 311-19 are now available.

The NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212 includes position standards designed to be used in conjunction with the Next Generation Position Task Book (Next Gen PTB). The Next Gen PTB for Basic Faller (FAL3) includes an evaluation guide with suggested rating elements to consider when assessing trainees.

References:

NWCG Standards For Wildland Fire Chainsaw Operations, PMS 212

NWCG Position Task Book for Basic Faller (FAL3), PMS 311-119

NWCG Basic Faller (FAL3)

RMC Memo 25-01: Summary of Updates to Safety Officer Positions

Date: April 9, 2025
Questions?  Please contact:
RMC Member Eric Fransted

The Risk Management Committee (RMC) serves as the position steward for all Safety Officer incident positions and continues to improve position standards, training, and naming conventions. The implementation of Complex Incident Management (CIM) required changes to position titles. RMC collaborated with the NWCG Incident Position Standards Committee (IPSC) to propose and implement these updates. 

References:

RMC Memo 25-01: Summary of Updates to Safety Officer Positions 

NWCG Position Catalog

Updated, NWCG Guide to Wildland Fire Origin and Cause Determination, PMS 412

Date: April 8, 2025
Questions?  Please contact:
Wildland Fire Investigation Subcommittee

PMS 412 provides guidance for wildland fire investigations. This guide outlines recommended procedures, practices, techniques, and methods to promote a systematic approach. The last update to this publication was in 2016.

References:

NWCG Guide to Wildland Fire Origin and Cause Determination PMS 412

Updated NWCG Standards for Airtanker Base Operations, PMS 508

Date: March 31, 2025
Questions?  Please contact:
Airtanker Base Operations Unit

The updated NWCG Standards for Airtanker Base Operations (SABO), PMS 508 standardizes operations and procedures at interagency airtanker bases to ensure safe, efficient, and effective operations in support of interagency goals and objectives.

References:

NWCG Standards for Airtanker Base Operations, PMS 508