Skip to main content

Fire Assessment: Observing Current Fire Behavior

  1. Visual Fire Behavior Descriptions
  2. Observing Flame Length vs. Flame Height
  3. Rate of Spread Estimator
  4. Fire Behavior Observation Reports

Visual Fire Behavior Descriptions

This guide identifies key terms for describing fire behavior and provides reference imagery and descriptive detail to aid observation reports.

Image
Fire Observation/Description.

Return to Top

Observing Flame Length vs. Flame Height

Observing Flames, as proxy for fireline intensity and indicator of tactical limitations, requires careful observation of flame length versus flame height. It is also important to identify whether the observation is for head, flank, or back of the fire.

Flame Length: The distance measured from the average flame tip to the middle of the active flaming zone at the base of the fire. It is measured on a slant when the flames are tilted due to effects of wind and slope.

Flame Height: The average height of flames as measured vertically, up, and down. It is estimated by comparing the flame to a nearby object of known height. Flame height is needed to estimate spot distance from a burning pile.

Image
Flame length is commonly estimated and referenced as analogous to the fireline intensity one would feel at the actively burning perimeter. Flame Height, on the other hand, is what most observers commonly report. Encourage users to identify and observe correctly.

Return to Top

Rate of Spread Estimator

From the NWCG Standards for Wildland Fire Module Operations, PMS 430.

Fireline observers can use this table to look up a spread rate based on how long it takes the flaming front to move a given distance.

Image
Estimating Rate of Spread.

Return to Top

Fire Behavior Observation Reports

Image
Fire Behavior Observation Form.

Return to Top

Print PDF

NWCG Latest Announcements

NWCG Equipment Technology Committee Releases Safety Warning: 25-001 Non-specification fire shelters

Date: January 15, 2025
Contact: Equipment Technology Committee

The Equipment Technology Committee (ETC) has released Safety Warning: 25-001 Non-specification fire shelters. Non-specification fire shelters claiming to meet Forest Service (FS) fire shelter specification 5100-606 were first found in February of 2023. As of September 2024, non-specification shelters are again being advertised and sold on the open market.

This Safety Warning outlines details and recommended procedures to purchase FS specification shelters made with materials and components that meet performance criteria and toxicity testing requirements outlined in FS Specification 5100-606. 

For additional information on identifying non-specification shelters, please view ETC Safety Warning 23-01.

References:

ETC Safety Warning 25-001: Non-specification fire shelters

NWCG Equipment Technology Committee

ETC Safety Warning 23-01

Paul Gleason Lead by Example Awards

Date: January 14, 2025
Contact: Leadership Committee

The NWCG Leadership Committee has awarded the 2023 Paul Gleason “Lead By Example” awards to individuals in the categories of Initiative and Innovation, Mentoring and Teamwork, and Motivation and Vision, as well as a Lifetime Achievement Award.

Congratulations to the awardees:

  • Sam Bowen, Superintendent of the Mark Twain Veteran Crew with the U.S. Forest Service.
  • Greg Titus, Zone Fire Management Officer for the St. Marks National Wildlife Refuge with U.S. Fish and Wildlife Service.
  • Renae Crippen, Manager of the Blue Mountain Interagency Dispatch Center with the U.S. Forest Service.
  • Eric Carlson, Instructor with OMNA International.

References:

Paul Gleason Lead by Example Award

Wildland Fire Leadership Development Program

Interview with Paul Gleason

Updated NWCG Standards for Water Scooping Operations, PMS 518

Date: December 19, 2024
Contact: Water Scooper Operations Unit

The NWCG Standards for Water Scooping Operations, PMS 518 establishes the standards for dispatching, utilizing, and coordinating water scooping aircraft on interagency wildland fires. These standards should be used in conjunction with the NWCG Standards for Aerial Supervision (SAS), PMS 505, and any local, state, or geographic/regional water scooping plans.

References:

NWCG Standards for Water Scooping Operations, PMS 518

Updated NWCG Standards for Aerial Supervision, PMS 505

Date: December 19, 2024
Contact: Interagency Aerial Supervision Subcommittee

The Interagency Aerial Supervision Subcommittee has updated the NWCG Standards for Aerial Supervision, PMS 505. PMS 505 establishes standards for aerial supervision operations for national interagency wildland fire operations. 

References:

NWCG Standards for Aerial Supervision, PMS 505