Skip to main content

6.4 Compass

A compass is an instrument used to determine direction in fire control work. An azimuth compass is graduated/marked with a full circle of 360 degrees called an azimuth circle. Compass components include a magnetic needle that always points to magnetic north, a graduated circle for laying off angles from true north, and a sighting line for extending a line of sight while following a course of direction. The north end of the needle is marked with a small arrow. 
 

compass
 

READING THE COMPASS AND SIGHTING

1. Always hold the compass level and firmly against the body to keep it still.
2. Determine which direction is north by moving to get the north needle to the correct position, magnetic north.
3. To determine the direction of an object, hold the compass and align the direction of the travel arrow with the object.
4. Read the azimuth where the index line meets the 360°dial. Look along the sighting line and then, by raising the eyes, extend the line of sight.
5. Take note of one or more objects, such as a tree or a rock, along the line of sight. Walk to the most distant object noted along the line of sight, and take another sight with the compass.

The compass direction can also be read off a map, by drawing a straight line between the initial point and the point of destination. Place the compass on the map so the orienting lines on the 360° dial point to north on the map. Read the compass on the map.

NWCG Latest Announcements

NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212, and Next Generation Position Task Book for Basic Faller Are Now Available

Date: April 14, 2025
Questions?  Please contact:
Hazard Tree and Tree Felling Subcommittee

The updated NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212, and NWCG Position Task Book for Basic Faller (FAL3), PMS 311-19 are now available.

The NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212 includes position standards designed to be used in conjunction with the Next Generation Position Task Book (Next Gen PTB). The Next Gen PTB for Basic Faller (FAL3) includes an evaluation guide with suggested rating elements to consider when assessing trainees.

References:

NWCG Standards For Wildland Fire Chainsaw Operations, PMS 212

NWCG Position Task Book for Basic Faller (FAL3), PMS 311-119

NWCG Basic Faller (FAL3)

RMC Memo 25-01: Summary of Updates to Safety Officer Positions

Date: April 9, 2025
Questions?  Please contact:
RMC Member Eric Fransted

The Risk Management Committee (RMC) serves as the position steward for all Safety Officer incident positions and continues to improve position standards, training, and naming conventions. The implementation of Complex Incident Management (CIM) required changes to position titles. RMC collaborated with the NWCG Incident Position Standards Committee (IPSC) to propose and implement these updates. 

References:

RMC Memo 25-01: Summary of Updates to Safety Officer Positions 

NWCG Position Catalog

Updated, NWCG Guide to Wildland Fire Origin and Cause Determination, PMS 412

Date: April 8, 2025
Questions?  Please contact:
Wildland Fire Investigation Subcommittee

PMS 412 provides guidance for wildland fire investigations. This guide outlines recommended procedures, practices, techniques, and methods to promote a systematic approach. The last update to this publication was in 2016.

References:

NWCG Guide to Wildland Fire Origin and Cause Determination PMS 412

Updated NWCG Standards for Airtanker Base Operations, PMS 508

Date: March 31, 2025
Questions?  Please contact:
Airtanker Base Operations Unit

The updated NWCG Standards for Airtanker Base Operations (SABO), PMS 508 standardizes operations and procedures at interagency airtanker bases to ensure safe, efficient, and effective operations in support of interagency goals and objectives.

References:

NWCG Standards for Airtanker Base Operations, PMS 508