Skip to main content

4.6 Chain, Pace, Walking a Chain

A chain is equal to 66 feet and is the basic unit for measuring distances in fire-control work. There are 80 chains in 1 mile.

A pace is the distance on level ground between the heel of one foot and the heel of the same foot where it next touches the ground while walking normally (two normal steps). As everyone's pace differs, it is important to determine one's individual pace length.

Walking a chain or chaining - To walk a chain, measure several chains on level ground with a steel tape, marking each chain with a stake. Walking normally from one stake to the other, count the paces. Divide by the number of chains that were measured off to get the number of paces per chain. A person's pace will change depending on whether pacing is uphill or downhill. In these situations, the number of paces per chain will need to be recalculated as above.

Example 1 - Victor marks off 3 chains or 198 feet (66 feet × 3 = 198 feet). He walks the distance in 36 paces. How many paces per chain is this? What is the length of each pace?

36 paces / 3 chains = 12 paces / chain
Set up the appropriate unit cancellation (see Chapter 2, Section 2.1) using 1 chain = 66 feet and solve for length of each pace.

The length of Victor's pace is 5 & 1/2 feet.

NWCG Latest Announcements

NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212, and Next Generation Position Task Book for Basic Faller Are Now Available

Date: April 14, 2025
Questions?  Please contact:
Hazard Tree and Tree Felling Subcommittee

The updated NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212, and NWCG Position Task Book for Basic Faller (FAL3), PMS 311-19 are now available.

The NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212 includes position standards designed to be used in conjunction with the Next Generation Position Task Book (Next Gen PTB). The Next Gen PTB for Basic Faller (FAL3) includes an evaluation guide with suggested rating elements to consider when assessing trainees.

References:

NWCG Standards For Wildland Fire Chainsaw Operations, PMS 212

NWCG Position Task Book for Basic Faller (FAL3), PMS 311-119

NWCG Basic Faller (FAL3)

RMC Memo 25-01: Summary of Updates to Safety Officer Positions

Date: April 9, 2025
Questions?  Please contact:
RMC Member Eric Fransted

The Risk Management Committee (RMC) serves as the position steward for all Safety Officer incident positions and continues to improve position standards, training, and naming conventions. The implementation of Complex Incident Management (CIM) required changes to position titles. RMC collaborated with the NWCG Incident Position Standards Committee (IPSC) to propose and implement these updates. 

References:

RMC Memo 25-01: Summary of Updates to Safety Officer Positions 

NWCG Position Catalog

Updated, NWCG Guide to Wildland Fire Origin and Cause Determination, PMS 412

Date: April 8, 2025
Questions?  Please contact:
Wildland Fire Investigation Subcommittee

PMS 412 provides guidance for wildland fire investigations. This guide outlines recommended procedures, practices, techniques, and methods to promote a systematic approach. The last update to this publication was in 2016.

References:

NWCG Guide to Wildland Fire Origin and Cause Determination PMS 412

Updated NWCG Standards for Airtanker Base Operations, PMS 508

Date: March 31, 2025
Questions?  Please contact:
Airtanker Base Operations Unit

The updated NWCG Standards for Airtanker Base Operations (SABO), PMS 508 standardizes operations and procedures at interagency airtanker bases to ensure safe, efficient, and effective operations in support of interagency goals and objectives.

References:

NWCG Standards for Airtanker Base Operations, PMS 508