Skip to main content

9.7 Planning

Hand crews primarily construct fireline but can also assist on hose lays, firing operations, protecting structures, mopping up, cleaning up, and other logistical support functions. It is important to match the task to crew capabilities. Use the best, most experienced crews for the toughest jobs and the hottest firelines. Crew effectiveness is controlled by these factors:

  1. Leadership: Good, competent leadership is key to the success of the crew.
  2. Training, Physical Fitness, and Experience: A crew that is well trained, in top physical condition, with several fires under the belt, will be very effective. A crew that is greatly trained and conditioned on the fireline increases the amount of line construction.
  3. Crew-Member Turnover: Frequent changes in crew membership will erode the team aspects.
  4. Morale: If a crew is "down", its productivity will be down.
  5. Fatigue: Exhausted crew members will be ineffective, with a much higher potential for accidents.
  6. Fuel, Weather, Topography, and Time of Day: In thick fuels and steep terrain, at the hottest time of the day, production will suffer. Working at night also will reduce production rates.
  7. Fire Behavior: If the level of fire behavior is high to extreme, deploying hand crews will be very dangerous. Conditions should be considered and planned for accordingly.

NWCG Latest Announcements

NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212, and Next Generation Position Task Book for Basic Faller Are Now Available

Date: April 14, 2025
Questions?  Please contact:
Hazard Tree and Tree Felling Subcommittee

The updated NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212, and NWCG Position Task Book for Basic Faller (FAL3), PMS 311-19 are now available.

The NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212 includes position standards designed to be used in conjunction with the Next Generation Position Task Book (Next Gen PTB). The Next Gen PTB for Basic Faller (FAL3) includes an evaluation guide with suggested rating elements to consider when assessing trainees.

References:

NWCG Standards For Wildland Fire Chainsaw Operations, PMS 212

NWCG Position Task Book for Basic Faller (FAL3), PMS 311-119

NWCG Basic Faller (FAL3)

RMC Memo 25-01: Summary of Updates to Safety Officer Positions

Date: April 9, 2025
Questions?  Please contact:
RMC Member Eric Fransted

The Risk Management Committee (RMC) serves as the position steward for all Safety Officer incident positions and continues to improve position standards, training, and naming conventions. The implementation of Complex Incident Management (CIM) required changes to position titles. RMC collaborated with the NWCG Incident Position Standards Committee (IPSC) to propose and implement these updates. 

References:

RMC Memo 25-01: Summary of Updates to Safety Officer Positions 

NWCG Position Catalog

Updated, NWCG Guide to Wildland Fire Origin and Cause Determination, PMS 412

Date: April 8, 2025
Questions?  Please contact:
Wildland Fire Investigation Subcommittee

PMS 412 provides guidance for wildland fire investigations. This guide outlines recommended procedures, practices, techniques, and methods to promote a systematic approach. The last update to this publication was in 2016.

References:

NWCG Guide to Wildland Fire Origin and Cause Determination PMS 412

Updated NWCG Standards for Airtanker Base Operations, PMS 508

Date: March 31, 2025
Questions?  Please contact:
Airtanker Base Operations Unit

The updated NWCG Standards for Airtanker Base Operations (SABO), PMS 508 standardizes operations and procedures at interagency airtanker bases to ensure safe, efficient, and effective operations in support of interagency goals and objectives.

References:

NWCG Standards for Airtanker Base Operations, PMS 508